pri电话呼入问题

看看你的设置文件：zapata.conf，
james.zhu

[channels]
language=cn
context=incoming
signalling=pri_cpe
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
pridialplan=local
;prilocaldialplan=local
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
rxgain=-8
txgain=-8
;group=0
callgroup=1
pickupgroup=1
immediate=no

;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
#include zapata-auto.conf
;switchtype = euroisdn
switchtype = national
group=1
;Include AMP configs
#include zapata_additional.conf
channel = 1-15
channel = 17-31
channel = 32-46
channel = 48-62
channel = 63-77
channel = 79-93

改一下这两个值试试：
pridialplan=local// unknown 或者 natioanl
prilocaldialplan=local
刚才的问题是网络不兼容引起的。他的可能是 64kbps.
james.zhu

pridialplan=local
prilocaldialplan=local
这样测试过，不可以

hello:
你让运营商改一下你的 设置， 支持 speech 的。
报错原因：
========================================
65 Bearer Capability Not Implemented.
Indicates that the equipment sending this cause does not support the bearer capability requested (i.e., requesting 64kb data when only speech is supported).
========================================
james.zhu

运营商不给改，说是改的话所有用户的就都改了